Browse all practice questions for the Contact Check Ride Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Contact Check Ride Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which weather conditions define LIFR restrictions?
  • Which sequence should be followed in a go-around to maintain proper pattern entry and exit?
  • What is a note in cockpit terminology?
  • What is the role of aeronautical decision making in flight planning?
  • What is the standard radio phraseology for requesting and receiving an ATC clearance, including how to confirm?
  • If 60 days elapsed since the last flight, what must the pilot do to stay current?
  • Loss of AFCS 1 results in loss of which DAFCS function?
  • OGE maneuvers are associated with which operation?
  • Why is ATC communication crucial during a check ride?
  • What is the minimum altitude you must remain above national parks, monuments, recreation areas, etc.?
  • What survival equipment must each helicopter crew member be equipped with?
  • Which of the following sequences correctly completes a go-around from the traffic pattern?
  • Which statement best describes hover drift standards?
  • What are the 2 sections of 1st stage mix unit?
  • In an out-of-trim emergency descent, what is the target airspeed?
  • If the CGI indicator is in the red for more than 45 seconds, what is required?
  • What is the recovery altitude for the low-speed emergency descent?
  • Which statement best describes ARROW in the context of aircraft documentation?
  • Which is a design feature meant to aid AFCS off flight?
  • During slow flight, what does monitoring energy help you maintain?
  • Which is a design feature meant to aid AFCS off flight?
  • Which advisory is used for less severe phenomena affecting larger areas and general aviation?
  • What is the safety-focused purpose of a steep turn and what should you monitor?
  • In instrument approaches, what does a LOC (localizer) approach primarily provide guidance for?
  • Which action best describes the first step in the proper go-around sequence?
  • Which steps support passenger safety during flight operations?
  • How do you determine if an alternate airport is viable for your trip?
  • What is the significance of stall characteristics when flaps are extended versus retracted?
  • During slow flight, which actions best demonstrate proper airplane control?
  • When ATC instructs you to descend to a specified altitude in Class C airspace, what is the proper action?
  • In IIMC procedures, what is the immediate action after declaring IMC and transitioning to instrument flight?
  • What does Class A airspace require for entry?
  • When does flight time end for an army aviator?
  • What is the AR 95-1 requirement to stay current as aviator on your airframe?
  • Which indicator best describes cylinder head temperature indicators and EGT when monitoring engine performance?
  • Which item is among the six mandatory minimum ALSE items for rotor-wing crews?
  • Which action comes immediately after applying full power smoothly during a go-around?
  • During a slope landing, which standard pertains to heading?
  • What is the effect of the center of gravity being outside its approved range?
  • Loss of AFCS 2 results in loss of which DAFCS function?
  • Which certificates must a private pilot carry and be ready to present when asked?
  • What are the main engine indications you monitor during flight?
  • What are the 2 reasons to initiate a go around?
  • In a roll-on, at what altitude should you begin establishing a decelerative attitude?
  • What is the basic principle behind entering Class B airspace?
  • Which technique should be avoided to aid AFCS off flight?
  • What is the specified airspeed range for a low-speed emergency descent?
  • What is pilotage in navigation?
  • Which of the following is included as a mandatory ALSE item?
  • When is heading hold turned off?
  • In a standard go-around, which action is executed first?
  • What is the role of a POH in flight planning and operation?
  • What is a caution in cockpit terminology?
  • Which statement about airworthiness certificates is true?
  • Which planning factors should be considered to address icing, freezing level, and air temperature?
  • Who will announce drift and altitude changes during hover?
  • Which regulation provides the requirements for placarding inoperative equipment and ensuring compliance before flight?
  • Which statement about the POH is accurate?
  • Which weather advisory is more urgent and affects safety for all aircraft?
  • How does a POH influence acceptable operating speeds and configurations?
  • Which factor should be considered when assessing landing distance as per ADM guidelines?
  • What is the rotor RPM at 100%?
  • A LOC or ILS approach is typically used in which conditions, and what is its general purpose on a check ride?
  • What are the key features of a sectional chart?
  • What is the standard way to interpret a METAR wind report for flight planning?
  • Which source is used to determine magnetic variation when converting true course to magnetic course?
  • What constitutes an acceptable landing distance assessment during a check ride?
  • Which technique is recommended to aid in AFCS off flight?
  • How does forward CG affect stall speed?
  • Which action is always performed first in the go-around sequence?
  • Slow flight is characterized by being near stall speed with a high angle of attack. Which is true about this condition?
  • What retrim action is specified for an out-of-trim emergency descent?
  • What is the correct requirement regarding icing in known or forecasted icing conditions?
  • What does CPT stand for in this context?
  • Which of the following is NOT a listed AFCS off flight design feature?
  • Which indicator best describes cylinder head temperature or exhaust gas temperature in engine monitoring?
  • Which item describes the flight standard for airspeed tolerance?
  • How do icing, freezing level, and air temperature influence flight planning?
  • What is the purpose of the DECIDE model in ADM?
  • How does human factors awareness influence decision making?
  • What is the difference between maintenance records and flight logs?
  • What does the DASH provide us?
  • In the mixing sequence, the 2nd stage combines inputs from the 1st stage mixing.
  • IFR restrictions are defined by ceilings or visibility below which values?
  • What step follows applying full power smoothly during a go-around?
  • What are the consequences of forward CG versus aft CG on stability and stall characteristics?
  • The aircraft's anti-collision lights must be on when the engine is running unless doing so would cause vertigo or a hazardous condition.
  • OGE maneuvers references are found in which document?
  • For planning a VFR flight, what must the destination be forecasted as at ETA plus one hour?
  • Why is it important to practice emergency procedures during the check ride?
  • Which of the following are PIC responsibilities?
  • What is the DECIDE model used in aeronautical decision making?
  • Which step comes second in the go-around sequence?
  • Which two axes use CCDA?
  • How can an airworthiness certificate become invalid?
  • Which item is NOT required to be on board for a flight under ARROW per 14 CFR Part 91?
  • What is the purpose of the legend on a sectional chart?
  • If you encounter a weather deviation during cross-country planning, what is the recommended approach?
  • What is the length of the winch cable?
  • How is flight time calculated for an army aviator?
  • Which of the following is NOT a stated effect of LCTs?
  • What does the CH-47 Class 1 Aircraft designation imply?
  • What are the associated winch speeds for rescue mode?
  • Which statement correctly describes the relationship between cargo and rescue winch speeds?
  • If you encounter unexpected weather, which sequence of actions is recommended?
  • ACFT will not be flown VFR on top of clouds for more than 30 minutes unless ...?
  • Which step concludes the go-around sequence?
  • Which statement best describes true course and magnetic course?
  • Which item is NOT listed as protective clothing for crew members?
  • When are position lights required to be on?
  • What is the correct sequence for a go-around from a traffic pattern?
  • What are the minimum visibility and cloud clearance for helicopter special VFR?
  • Which condition is a trigger for reweighing the aircraft due to weight and CG concerns?
  • In a roll-on, what is the maximum nose-high pitch attitude allowed at touchdown?
  • How should an aircraft with inoperative instruments be handled before flight?
  • Which statement describes the 2nd stage mixing?
  • What is the purpose of best glide speed in engine-out scenarios?
  • During a steep turn, which elements must be monitored to maintain a safe, recoverable flight condition?
  • VFR restrictions are defined by which weather minimums?
  • Which statement best describes ARROW documents?
  • What is the purpose of a go-around procedure?
  • Pressing the CD Release disengages which autopilot modes?
  • In the mixing assembly, which statement is true about the first stage mixing?
  • During slow flight, you are near stall speed with a high angle of attack. Which recovery procedure is correct?
  • How should you interpret ceiling and visibility in weather reports for flight planning, and what do they indicate?
  • Which statement about electronic flight bag (iPad) requirements is accurate?
  • Which of the following is an ALSE item included in the six?
  • Which actions contribute to stability and coordination in a turn?
  • How do you determine magnetic variation and apply it to a course?
  • During a low-speed emergency descent, what is the maximum bank angle?
  • Aircraft will not be flown into what type of icing?
  • Why is it important to be familiar with stall characteristics for both flap configurations?
  • What is an AIRMET?
  • What can you ask to fly into severe turbulence for?
  • What takeoff type options are listed for VMC takeoff standards?
  • In the low-speed emergency descent, what is the thrust setting?
  • Which statement best describes the role of energy management in flight safety?
  • Which technique is recommended to aid in AFCS off flight?
  • What is the correct sequence for a routine simulated engine-out approach?
  • What Gs are required to lock your shoulder harness?
  • What are the common standards for a hover?
  • How can you identify Class C and Class D airspace on a chart?
  • Which statement is listed as a standard for VMC takeoff?
  • Which statement is a standard for taxiing?
  • Why weight and balance is critical for flight safety?
  • Which item is not included in ARROW as a required document?
  • Which technique is recommended to aid in AFCS off flight?
  • What are the common standards for flight?
  • When the CD Release is pressed, which autopilot modes are suspended?
  • What is the blade tip speed at 100% rotor RPM?
  • What is the relationship between true north and magnetic variation?
  • All inputs from the 1st stage mixing are combined in which stage?
  • What does wind gusts in wind reports indicate for flight planning?
  • Where is the first stage mixing assembly?
  • In rescue mode, the winch speed is closest to which value?
  • Heading hold off action is turning off by performing which maneuver?
  • Which statement about EFB battery requirements is accurate?
  • Which elements should be included in a cross-country flight plan?
  • In an out-of-trim emergency descent, what thrust setting is specified?
  • For the out-of-trim procedure, what is the recovery altitude and deceleration target?
  • What is a warning in cockpit terminology?
  • What action follows establishing a climb attitude in the go-around sequence?
  • What is the recommended action if an engine failure occurs during takeoff after liftoff?
  • How often must an aircraft be reweighed?
  • What is a METAR and what does it report?
  • What are the two winch modes?
  • What items should be checked in a thorough preflight inspection?
  • How do you handle an in-flight engine failure after takeoff in a single-engine aircraft?
  • In a go-around, which order of actions correctly describes the go-around sequence?
  • Where should PIC time be logged and what information should be included?
  • What is dead reckoning navigation?
  • Which factor is essential when evaluating whether an alternate airport is viable?
  • Which is a design feature meant to aid AFCS off flight?
  • What is the final action in the proper go-around sequence from the traffic pattern?
  • What is the correct rationale for reading back ATC clearance and instructions on a check ride?
  • What are the fuel reserve requirements for VFR and IFR flight?
  • What is the general planning rule near convective weather during planning?
  • In cargo mode, the winch speed is closest to which value?
  • Where must the 60-day proficiency flight be conducted?
  • Complete the sequence: power, climb, flaps, and then what?
  • What are the fundamental safety nets in ADM beyond DECIDE?
  • What is a SIGMET?
  • Which of the following is a standard for selecting takeoff type in VMC takeoff procedures?
  • Which comes after establishing a climb attitude in the go-around sequence and before resuming the pattern?
  • What thrust setting is used for a High Speed Straight Emergency Descent?
  • Marginal VFR restrictions are defined by which ranges?
  • When choosing an alternate airport during flight planning, which factors should you consider?
  • Which statement about lighting is true when the engine is running?
  • What are the associated winch speeds for cargo mode?
  • What is the purpose of standard instrument conditions during a check ride scenario?
  • What is the purpose of maintaining a sterile cockpit during critical phases?
  • Which statement best describes the difference between a power-on stall and a power-off stall?
  • Moderate icing conditions require which of the following actions?
  • Where would you reference OGE maneuvers in training materials?
  • Who can approve flying into forecasted severe turbulence?
  • What is the purpose of a standard weather briefing?
  • Which of the following is a mandatory ALSE item?
  • During a High Speed Straight Emergency Descent, what is the target airspeed?
  • Which elements related to speed and configuration are provided by the POH?
  • If flight is to be made into known or forecasted moderate icing what does it need?
  • What is the purpose of a preflight checklist?
  • What is the center of gravity and how does it affect aircraft performance?
  • How do you calculate fuel requirements for a cross-country trip?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy